Industrial Centrifugal Pump 3,400 L/min 22.3m — 4CA 100-250A
HIGH-EFFICIENCY CONTINUOUS OPERATION: Features a slow-speed 1450 RPM (4-pole) hydraulic setup that delivers water flow up to 3400 L/min with smooth pressure output up to 22.3m.
MAXIMUM ENERGY SAVINGS WITH LOW-POWER MOTOR: Driven by an ultra-efficient 15 HP 11kW 4-pole electric motor on a steel baseplate, designed to operate continuously with minimal electrical kilowatt usage.
QUIET, LONG-LIFE HEAVY-DUTY OPERATION: The 1450 rpm slow rotation dramatically reduces mechanical wear, noise, and vibration, providing long, maintenance-free service life in commercial HVAC and water circulation systems.
ROBUST INDUSTRIAL MATERIALS: Built with a cast iron pump body, cast iron bracket, AISI 316 stainless steel pump shaft end, and a mechanical seal for complete structural reliability.
EN 733 STANDARDIZED TURNKEY SYSTEM: Delivered fully assembled on a rigid baseplate with flexible drive coupling and protective guard, operating safely at pressures up to 10 bar and temperatures from -10°C to +90°C.
Product information
The Pentax 4CA100-250A+MOT160M is a commercial-grade, baseplate-mounted 4-pole horizontal centrifugal pump unit constructed in full compliance with EN 733 European hydraulic standards. Specially designed for continuous circulation in HVAC heating and cooling loops, municipal water transfer, agricultural irrigation, and industrial process systems, this unit emphasizes whisper-quiet operation and high energy efficiency.
Equipped with a 11 kW (15 HP) 4-pole IE3 electric motor running at 1450 RPM, it delivers up to 3400 L/min with a pressure head up to 22.3m. The complete unit comes pre-assembled on a steel baseplate connected via a flexible shaft coupling with a safety guard, protecting components from axial misalignment.
Built for heavy continuous duty, the pump features a cast iron pump body and seal plate, an AISI 316 stainless steel shaft end, and a mechanical seal. Handling fluid temperatures from -10°C to +90°C at system pressures up to 10 bar, the Pentax 4CA+MOTOR series supports customizable options including cast iron, bronze, or AISI 316 stainless steel impellers, counter-flange kits, and gland packing seals.
Impeller & Configuration Comparison:
Cast Iron Impeller (Standard): Excellent, cost-effective option for clean water in daily circulation systems.
Bronze Impeller (Optional): Prevents rust lock-up during long standby periods and delivers superior resistance to sea water and cavitation.
Stainless Steel AISI 316 Impeller (Optional): Offers maximum corrosion and chemical resistance for harsh technical liquids.
Gland Packing (Optional): Traditional braided packing alternative to mechanical seals for environments with sand or particles.
Note: Fully assembled on baseplate with 4-pole motor, flexible coupling, and coupling guard included.
Features & Specs
Model Complete Unit 4CA100-250A+MOT160M
Pomp Type 4-polige (1450 tpm) laagtoerige centrifugaalpompunit op voetplaat - Gebouwd voor zwaar industrieel gebruik
Motorvermogen 15 HP 11kW - Energiebesparende prestaties
Motorframe / Efficiëntieklasse MOT160M frame / IE3 hoog rendement (4-polig) - Lagere elektriciteitsrekeningen
Motortoerental ~1450 tpm (4-polig) - Ultra-stil & langdurig
Spanning / Frequentie 3~ 230/400V - 50Hz
Max debiet (Q max) 3400 L/min - Grote volumes waterverplaatsing
Max opvoerhoogte (H max) Tot 22,3m - Consistente druklevering
Diameter mechanische afdichting 20 mm Hydraulische norm Naleving van EN 733 normen - Europese kwaliteit gegarandeerd
Bedrijfsdruk Max 10 bar Vloeistoftemperatuurbereik -10 °C tot +90 °C - Verwerkt warme & koude vloeistoffen Pompbehuizing / beugelmateriaal Massief gietijzer / gietijzer - Maximale duurzaamheid
Materiaal pompasuiteinde Roestvrij staal AISI 316 - Roest- & corrosiebestendig
Standaard waaier materiaal Gietijzer (Optioneel: Brons of Roestvrij staal AISI 316)
Mechanische afdichting / Bescherming Keramisch-Grafiet-NBR / IPX5 (Klasse F isolatie) - Lekvrije betrouwbaarheid
Montagecomponenten Stalen voetplaat, flexibele koppeling, koppelingsbeschermkap, IE3 4-polige motor - Klaar om te installeren turnkey systeem
Optionele accessoires Tegenflensset, pakkingbusafdichting, brons/AISI 316 waaier
Dimensions
Model: 4CA100-250A+MOT160M
Product Dimensions (cm): 73.2 x 31.6 x 31.6 cm
Pump Weight (kg): 102 kg
Motor Weight (kg): 83 kg
Total Weight (kg): 185 kg