AISI 316 Stainless Centrifugal Pump 700 L/min 34.9m — CAX 40-160A
-
HIGH-EFFICIENCY HYDRAULIC PERFORMANCE: Complete EN 733 centrifugal pumping system delivering water flow up to 700 L/min (42 m³/h) with a pressure lift head reaching 34.9 meters (3.49 bar).
-
OPTIMIZED ENERGY SAVINGS WITH IE3 MOTOR: Driven by a premium IE3 high-efficiency electric motor (MOT132S frame) mounted on a rigid baseframe, engineered to minimize electricity costs during continuous commercial duty.
-
ALL-AISI 316 STAINLESS STEEL CONSTRUCTION: Features a 100% rust-free, acid-resistant AISI 316 stainless steel pump body, motor bracket, impeller, and shaft end for aggressive, high-purity, and food-grade liquids.
-
COMPLETE TURNKEY BASEPLATE SYSTEM: Pre-assembled at the factory on a heavy-duty steel baseplate with a flexible drive coupling and protective guard, eliminating alignment errors and reducing installation labor.
-
CUSTOMIZABLE INDUSTRIAL SEALING: Equipped standard with a premium ceramic-graphite-NBR mechanical seal for clean fluids, with optional gland packing for liquids containing sand, sediment, or abrasive particles. Perfectly adapted for civil systems.
Product information
The Pentax CAX40-160A+MOT132S is a complete, factory-assembled industrial horizontal centrifugal pump station constructed entirely from AISI 316 stainless steel in strict compliance with EN 733 European standards. Specifically engineered for civil systems, it offers unmatched corrosion resistance and operational readiness.
Powered by a premium IE3 high-efficiency 2-pole electric motor (132S frame), the assembly delivers a maximum delivery flow rate up to 700 L/min with a pressure head reaching 34.9 meters. The entire unit is precision-mounted on a heavy-duty steel baseplate connected via a flexible shaft coupling with a safety guard, protecting internal bearings from axial stress and vibration.
Built for severe operating conditions, the pump features a full AISI 316 stainless steel hydraulic assembly (pump body, bracket, impeller, and shaft end) and a premium ceramic-graphite-NBR mechanical seal. Handling fluid temperatures from -10°C to +90°C at operating pressures up to 10 bar, the Pentax CAX+MOTOR series supports optional upgrades such as AISI 316 counter-flange kits and traditional gland packing seals.
Sealing Options (Mechanical Seal vs. Gland Packing):
Mechanical Seal (Standard - Ceramic-Graphite/NBR): Best for clean water, chemical liquids, and food processing. Provides a 100% drip-free, zero-leak seal that requires zero routine adjustment.
Gland Packing (Optional Upgrade): Best for dirty water, sandy fluids, or abrasive technical liquids. Uses traditional braided packing glands that tolerate particle wear and can be easily tightened or repacked directly on-site without opening the pump.
Note: Fully assembled turnkey unit on baseplate with IE3 motor, flexible coupling, and coupling guard included.
Features & Specs
Model Complete Unit CAX40-160A+MOT132S
Pomptype Volledig AISI 316 roestvrijstalen centrifugaalpompunit EN 733
Motorframe / Efficiëntieklasse MOT132S frame / IE3 Premium hoog rendement
Spanning / Frequentie 3~ 230/400V - 50Hz (of 400/690V)
Max debiet (Q max) 700 L/min
Max opvoerhoogte (H max) 34,9 meter
Hydraulische norm Conform EN 733 normen
Bedrijfsdruk Max 10 bar Vloeistoftemperatuurbereik -10 °C tot +90 °C Pompbehuizing / beugelmateriaal Roestvrijstaal AISI 316
Pompasuiteinde / waaier materiaal Roestvrijstaal AISI 316 / Roestvrijstaal AISI 316
Standaard afdichting Keramisch-grafiet-NBR (optioneel: pakkingbus)
Montagecomponenten Stalen bodemplaat, flexibele koppeling, koppelingsbeschermkap, IE3-motor
Optionele accessoires AISI 316 tegenflensset, pakkingbusafdichting
Dimensions
Model: CAX40-160A+MOT132S
Product Dimensions (cm): 63.9 x 15.7 x 17 cm
Pump Weight (kg): 19 kg
Motor Weight (kg): 17 kg
Total Weight (kg): 36 kg