AISI 316 Stainless Centrifugal Pump 2,200 L/min 25.2m — CAX 65-125A
-
HIGH-EFFICIENCY HYDRAULIC PERFORMANCE: Complete EN 733 centrifugal pumping system delivering water flow up to 2200 L/min (132 m³/h) with a pressure lift head reaching 25.2 meters (2.52 bar).
-
OPTIMIZED ENERGY SAVINGS WITH IE3 MOTOR: Driven by a premium IE3 high-efficiency electric motor (MOT132S frame) mounted on a rigid baseframe, engineered to minimize electricity costs during continuous commercial duty.
-
ALL-AISI 316 STAINLESS STEEL CONSTRUCTION: Features a 100% rust-free, acid-resistant AISI 316 stainless steel pump body, motor bracket, impeller, and shaft end for aggressive, high-purity, and food-grade liquids.
-
COMPLETE TURNKEY BASEPLATE SYSTEM: Pre-assembled at the factory on a heavy-duty steel baseplate with a flexible drive coupling and protective guard, eliminating alignment errors and reducing installation labor.
-
CUSTOMIZABLE INDUSTRIAL SEALING: Equipped standard with a premium ceramic-graphite-NBR mechanical seal for clean fluids, with optional gland packing for liquids containing sand, sediment, or abrasive particles. Perfectly adapted for municipal supply.
Product information
The Pentax CAX65-125A+MOT132S is a complete, factory-assembled industrial horizontal centrifugal pump station constructed entirely from AISI 316 stainless steel in strict compliance with EN 733 European standards. Specifically engineered for municipal supply, it offers unmatched corrosion resistance and operational readiness.
Powered by a premium IE3 high-efficiency 2-pole electric motor (132S frame), the assembly delivers a maximum delivery flow rate up to 2200 L/min with a pressure head reaching 25.2 meters. The entire unit is precision-mounted on a heavy-duty steel baseplate connected via a flexible shaft coupling with a safety guard, protecting internal bearings from axial stress and vibration.
Built for severe operating conditions, the pump features a full AISI 316 stainless steel hydraulic assembly (pump body, bracket, impeller, and shaft end) and a premium ceramic-graphite-NBR mechanical seal. Handling fluid temperatures from -10°C to +90°C at operating pressures up to 10 bar, the Pentax CAX+MOTOR series supports optional upgrades such as AISI 316 counter-flange kits and traditional gland packing seals.
Sealing Options (Mechanical Seal vs. Gland Packing):
Mechanical Seal (Standard - Ceramic-Graphite/NBR): Best for clean water, chemical liquids, and food processing. Provides a 100% drip-free, zero-leak seal that requires zero routine adjustment.
Gland Packing (Optional Upgrade): Best for dirty water, sandy fluids, or abrasive technical liquids. Uses traditional braided packing glands that tolerate particle wear and can be easily tightened or repacked directly on-site without opening the pump.
Note: Fully assembled turnkey unit on baseplate with IE3 motor, flexible coupling, and coupling guard included.
Features & Specs
Model Complete Unit CAX65-125A+MOT132S
Pump Type All-AISI 316 Stainless Steel Complete Centrifugal EN 733 Pump Unit
Motor Frame / Efficiency Class MOT132S Frame / IE3 Premium High Efficiency
Voltage / Frequency 3~ 230/400V - 50Hz (or 400/690V)
Max Flow Rate (Q max) 2200 L/min
Max Lift Head (H max) 25.2 meters
Hydraulic Standard Compliance with EN 733 Standards
Operating Pressure Max 10 bar Liquid Temperature Range -10 °C to +90 °C Pump Body / Bracket Material Stainless Steel AISI 316
Pump Shaft End / Impeller Material Stainless Steel AISI 316 / Stainless Steel AISI 316
Standard Sealing Ceramic-Graphite-NBR (Optional: Gland Packing)
Assembly Components Steel Baseplate, Flexible Coupling, Coupling Guard, IE3 Motor
Optional Accessories AISI 316 Counter-flange kit, Gland Packing Seal
Dimensions
Model: CAX65-125A+MOT132S
Product Dimensions (cm): 63.9 x 15.7 x 17 cm
Pump Weight (kg): 19 kg
Motor Weight (kg): 17 kg
Total Weight (kg): 36 kg