DTR 150 Heavy-Duty Submersible Sewage Grinder Pump 300L/min 18.5m 20m Submersion
-
HEAVY-DUTY SEWAGE SHREDDING SYSTEM: Equipped with an industrial-grade treated stainless steel grinder that easily shreds organic solids, textiles, rags, and filamentous fibers in black water to completely eliminate clogging risks.
-
HIGH-EFFICIENCY HYDRAULIC DISCHARGE: Delivers an impressive water volume up to 300 L/min (18 m³/h) with a high pressure head reaching up to 18.5 meters, quickly emptying deep septic tanks and flooded sumps.
-
OPTIMIZED ENERGY SAVINGS & POWER OUTPUT: Powered by a 1.1 kW (1.5 HP) oil-bath induction motor designed to maximize hydraulic torque while keeping electrical consumption low, reducing running costs during heavy daily operations.
-
EXTREME 20-METER SUBMERSION DEPTH: Engineered for continuous heavy duty under high water pressure, supporting safe submersion down to 20 meters deep—four times deeper than standard drainage pumps.
-
PRO-GRADE CAST IRON CONSTRUCTION: Built with a cataphoresis-painted cast iron body and cast iron open impeller, AISI 304 stainless steel shaft, A2 stainless steel bolts, galvanized iron foot support, and an oil-barrier double mechanical seal (IPX8 waterproof rating).
Product information
The Pentax DTR 150 (and 3-phase DTRT 150) is a heavy-duty, industrial-grade Italian submersible sewage grinder pump engineered for demanding residential, civil, and agricultural wastewater applications. Constructed with a cataphoresis-coated cast iron body and a cast iron open impeller, it provides extreme durability and rust protection for continuous underwater use down to 20 meters.
Unlike standard drainage or sewage pumps, the DTR 150 features an integrated treated stainless steel grinder mechanism paired with a powerful 1.5 HP oil-bath motor. This shredding system easily pulverizes sewage, rags, textiles, and organic fibers in septic tanks and residential sumps into fine slurry, preventing pipe clogs and allowing smooth pumping through standard 2" G discharge outlets.
Engineered for maximum reliability and lower energy bills, the DTR 150 includes a professional double mechanical seal in an oil chamber (silicon carbide on the pump side, ceramic-graphite on the motor side), A2 stainless steel bolts, and an AISI 304 stainless steel motor shaft. Equipped with a 10-meter H07 RN8F power cable, the Pentax DTR 150 is the ultimate high-head shredding solution for seamless wastewater management.
Note: Suitable for clean water, grey water, and black water containing sewage and organic fibers at liquid temperatures from 0°C to +40°C.
Features & Specs
Model DTR 150 (Single-Phase 1~) / DTRT 150 (Three-Phase 3~)
Pump Type Submersible Sewage Grinder Pump
Special Feature Treated Stainless Steel Grinder / Shredder System
Motor Power 1.5 HP / 1.1 kW Voltage Options 1~ 230V (requires 35µF run + 80µF start capacitor with disjunctor) / 3~ 230V, 400V, 230/400V, 400/690V - 50Hz
Max Flow Rate (Q max) 300 L/min (18 m³/h)
Max Lift Head (H max) 18.5 meters (range 18.5m to 9.9m)
Max Submergence Depth 20 meters Pump Body / Impeller Cast iron with cataphoresis coating / Cast iron open impeller
Mechanical Seal Double seal with oil barrier (Silicon carbide / Ceramic-graphite)
Motor Shaft / Bolts Stainless Steel AISI 304 / A2 Stainless Steel
Foot Support / Gaskets Galvanized iron / NBR rubber
Discharge Outlet (DNM) 2" G Protection / Insulation IPX8 / Class F Power Cable Length 10 meters (H07 RN8F)
Codes
DTR 150
Dimensions
Product Dimensions: 20.5 x 20.5 x 51.3 cm
Weight: 38 kg