DCT 560 Heavy Duty Centrifugal Pump 850l/min 36.1m for Civil Use
UNSTOPPABLE FLOOD EXTRACTION: Blasts away water at 850 L/min (51 m³/h) with an extreme 36.1-meter lift head. Designed to conquer the most severe flooding, deep excavations, and heavy industrial drainage.
INDUSTRIAL 5.5 HP 3-PHASE MOTOR: Powered by a beastly 4 kW (5.5 HP) 400V three-phase oil-bath motor. Provides relentless power and energy efficiency for 24/7 heavy-duty commercial pumping.
DEEP 20-METER SUBMERSION RATING: Engineered for extreme underwater pressure, supporting safe, continuous operation up to 20 meters deep—perfect for large-scale civil engineering projects.
RUGGED CAST IRON CONSTRUCTION: Survives the harshest conditions with a cataphoresis-coated cast iron body and impeller, a robust AISI 304 stainless steel shaft, and A2 stainless steel hardware.
FAIL-SAFE DOUBLE SEAL SYSTEM: Protects your investment with a premium double mechanical seal in an oil bath (silicon carbide/ceramic-graphite), ensuring total leak prevention under heavy strain.
Product information
The Pentax DCT 560 is a commercial-grade, high-head Italian submersible drainage pump specifically engineered for very heavy civil, industrial, and agricultural use. Built with a rugged cataphoresis-coated cast iron body and cast iron impeller, it handles gray water and drainage with suspended solids up to 10 mm without clogging or wear.
Unlike lightweight plastic pumps, the DCT 560 features a robust 3-phase 5.5 HP oil-bath induction motor designed for continuous operation under extreme pressure. It generates an impressive lift head of up to 36.1 meters and an immense flow rate of 850 L/min through a wide 2" discharge outlet. Its heavy-duty construction allows safe, long-term submersion at depths down to 20 meters.
Designed for maximum reliability and lower energy costs, the pump incorporates an oil-barrier double mechanical seal (silicon carbide / ceramic-graphite), A2 stainless steel bolts, NBR gaskets, and an AISI 304 stainless steel motor shaft. Equipped with a 10-meter H07 RN8F power cable, the Pentax DCT 560 is the ultimate high-head solution for demanding drainage environments.
Note: Suitable for clean, gray, or slightly dirty drainage water with suspended solids up to Ø max 10 mm at liquid temperatures from 0°C to +40°C.
Features & Specs
Model DCT 560 (Three-Phase 3~)
Pump Type Commercial Submersible Drainage Pump
Motor Power 5.5 HP / 4 kW (Unstoppable Torque)
Voltage Options 3~ 400V - 50Hz (24/7 Operation Ready)
Max Flow Rate (Capacity) 850 L/min (51 m³/h) - Ultimate Flood Control
Max Lift Head (Pressure) 36.1 meters - Extreme Vertical Extraction
Max Submergence Depth 20 meters (Deep-Water Dominance)
Passage of Solids Up to Ø 10 mm (Continuous Flow Design)
Build Material Heavy-Duty Cast Iron with Anti-Rust Shield
Leak Protection 100% Waterproof Double Mechanical Seal in Oil Bath (Silicon carbide / Ceramic-graphite)
Discharge Outlet DN 50 Flange (Wide Industrial Port)
Durability Rating IPX8 100% Waterproof / Class F Insulation
Power Cable 10 meters (Heavy-Duty H07 RN8F)
Codes
DCT 560Dimensions
Product Dimensions: 26.3 x 26.3 x 59.5 cm
Weight: 63.5 kg