top of page
DM 160 Sewage Water Pump 900 L/min 15.3m for Industrial Heavy Use
SKU: DM 160

DM 160 Sewage Water Pump 900 L/min 15.3m for Industrial Heavy Use

€1,181.00Price
Excluding VAT |
Quantity
3-4 weeks delivery
            
  •         
    HIGH-CAPACITY INDUSTRIAL EFFICIENCY: Moves a massive water volume up to 900 L/min (54 m³/h) with a maximum pressure head of 15.3 meters, rapidly clearing sewage pits, civil sumps, and flooded industrial areas.
            
    •         
  •         
    OPTIMIZED ENERGY SAVINGS: Advanced single-channel hydraulic engineering delivers maximum flow volume per watt, reducing power consumption during continuous heavy-duty operations to cut electricity bills.
            
    •         
  •         
    LARGE 50 MM SOLID PASSAGE: Equipped with a solid cast iron single-channel impeller that allows suspended solids up to 50 mm (2 inches) in diameter to pass through smoothly without clogging.
            
    •         
  •         
    EXTREME 20-METER SUBMERSION DEPTH: Built for extreme underwater conditions with a heavy-duty cataphoresis-painted cast iron body, supporting continuous duty submerged down to 20 meters deep.
            
    •         
  •         
    PRO-GRADE OIL-BARRIER DOUBLE SEAL: Features a double mechanical seal with an oil barrier (silicon carbide on pump side, ceramic-graphite on motor side) and an AISI 304 stainless steel shaft for total motor protection (IPX8 waterproof rating).

  • Product information

    The Pentax DM 160 (and 3-phase DMT 160) is a heavy-duty Italian submersible sewage pump specifically engineered for civil, industrial, and agricultural heavy use. Built with a solid cataphoresis-coated cast iron pump body and cast iron single-channel impeller, it provides extreme durability and corrosion resistance for continuous underwater service down to 20 meters.

    Unlike standard drainage pumps, the DM 160 utilizes a specialized single-channel impeller. This hydraulic design combines high energy efficiency with a large 50 mm (2-inch) free solid passage, allowing raw sewage, grey water, and black water with thick solids to move through without clogging. Driven by a 1.1 kW (1.5 HP) oil-bath motor, it delivers an enormous flow rate up to 900 L/min.

    Designed for maximum reliability under tough conditions, the pump incorporates an oil-barrier double mechanical seal (silicon carbide / ceramic-graphite), A2 stainless steel bolts, NBR gaskets, a galvanized iron foot support, and an AISI 304 stainless steel shaft. Complete with a 10-meter H07 RN8F power cable, the Pentax DM 160 is the ultimate high-capacity pump for heavy-duty civil and commercial sewage systems.

    Note: Suitable for clean water, grey water, and black water with suspended solids up to Ø max 50 mm at liquid temperatures from 0°C to +40°C.

  • Features & Specs

    Model

    DM 160 (Single-Phase 1~) / DMT 160 (Three-Phase 3~)
    Pump Type

    Submersible Single-Channel Sewage Drainage Pump
    Motor Power 1.5 HP / 1.1 kW
    Voltage Options

    1~ 230V (requires 35µF run capacitor) / 3~ 230V, 400V, 230/400V, 400/690V - 50Hz
    Max Flow Rate (Q max)

    900 L/min (54 m³/h)
    Max Lift Head (H max) 15.3 meters
    Max Submergence Depth 20 meters
    Passage of Solids

    Up to Ø max 50 mm (2 inches)
    Pump Body / Impeller

    Cast iron with cataphoresis coating / Cast iron single-channel
    Mechanical Seal

    Double seal with oil barrier (Silicon carbide / Ceramic-graphite)
    Motor Shaft / Bolts

    Stainless Steel AISI 304 / A2 Stainless Steel
    Foot Support / Gaskets

    Galvanized iron / NBR rubber
    Discharge Outlet (DNM) DN 65
    Protection / Insulation IPX8 / Class F
    Power Cable Length

    10 meters (H07 RN8F)

  • Codes

    DM 160

  • Dimensions

    • Dimensions (mm): Ct: 551 | Ht: 123 | R: 117 | It: 191 | mt: 243 | Mt: 513
    • Discharge Outlet (DNM): 65
    • Weight: 41.5 Kg
bottom of page