top of page
PENTAX_INDUSTRIES_white_logo.png
SKU: CP 75

CP 75 - Liquid-ring Electric Pump (53 m, 45 l/min, 230V) for diesel

€249.00Price

The Pentax CP 75 is a reliable and practical liquid-ring electric pump suitable for clean water, for liquid transfer and diesel.

With the Pentax CP 75, you can be sure that your water is being pumped in the most efficient way possible. This practical centrifugal pump with an impeller and robust construction for reliable continuous operation. The model has a frontal brass closing, thus avoiding the risk of blockage.

Pumps of this series are recommended for pumping clean water without the presence of abrasive particles and chemically non-aggressive liquids. Particularly suitable for liquid transfer (including volatile liquids). 

The normal functioning of the pumps is also guaranteed in the following problematic cases:
✔ it is necessary to suck up volatile or foamy liquids;
✔ the pumped liquid is mixed with gas;
✔ the pumped Diesel or Kerosene.

 

CONSTRUCTION FEATURES
P2: 0.74 kW;
Q max: 2.7 m3/h;
H max: 53 m.

 

About CP-Series

 

✅ In addition to its great performance, the CP 75 is also very easy to use. It has a very simple design, and it's the support closes the pump housing from the back side. Due to their special operating principle, their installation can be a good solution in cases where a compact self-priming electric pump is needed and when the water flow is insufficient or irregular.  

  • Specifications

    Construction Features  Option 
    Pump body cast iron + brass insert 
    Motor bracket cast iron
    Impeller brass
    Mechanical seal ceramic-graphite / NBR
    Motor shaft stainless steel AISI 416
    Liquid temperature 0 - 90 °C
    Operating pressure max 8 bar  
    Voltage 230 Volts
    Horsepower 1 H
    Flow rate 45 Litres Per Minute (2.7 m³/h)
    Rated current 5.4A

     

    Motor Option 
    2 poles induction motor 1~ 230V-50Hz
    Insulation class F
    Protection degree IPX4

     

    Product Dimensions 26 x 12 x 15.8 cm
    Item Weight 12 kgs
    Manufacturer PENTAX INDUSTRIES S.P.A. (Italy)
  • EAN Code

  • Manufacturer's Code

    CP 75
  • Interchangeability with other manufacturers:

    Foras PL 100
  • Manual

bottom of page